FixIngenieria - Artículos de robótica en México

Adaptando el futuro

34 Watt Solar Panel Kit

Parallax’s 34 Watt Solar Panel Kit is a do-it-yourself system that can produce up to a maximum of 34 watts of clean green electrical energy.

This is not another solar demonstration toy! It is a true “kit”—you assemble it from a pile of raw parts—and when you’re done, you will have a solar panel that produces a substantial amount of electrical power. In fact, the energy produced per square foot is comparable to many commercially available solar panels. And, when you permanently seal the panel, it can withstand the outside elements as well.

Our demonstration videos (below) show you how to properly handle and solder the delicate cells and their wiring interconnections.

Key Features:

  • Array of 12 commercial-grade 125 mm (~5"), 2.85 watt, 18.5% efficiency monocrystalline solar cells
  • UV stabilized polycarbonate base and cover panels provide outdoor durability and high light transmission properties without the fragility of glass or brittleness of acrylic
  • Custom-milled base panel with a protective recess for each cell simplifies assembly
  • Daisy-chain multiple units together for higher voltage/current/power output

Application Ideas:

  • Portable power for camping, remote monitoring, and control systems
  • Fixed power station for off-grid energy production
  • Mobile robotics and solar charging stations
$ 300.00
$ 285.00
5%

5 Volt 550 mA USB Power Supply

The 5 Volt 550 mA USB Power Supply provides power to USB devices that support the USB Battery Charging Specification.  The power supply works with most Parallax products that use the FT231X USB to serial converter.  It also works with the P8X32A QuickStart Board Rev A when the /USB_Power_Enable line is driven low.

Connect devices to the USB power supply the same way they would connect to a USB port on a computer; connect the ’A’ end of a USB A to mini B to the power supply, and connect the ’Mini B’ end to a device in need of power.  If the device supports the USB Battery Charging Specification, it will detect the supply and power on.  The power supply can provide 550 mA of power at 5 VDC, 10% more than the highest current that a USB 2.0 port supplies.

Key Features:

  • Provides power to compatible products without using a computer
  • Can deliver more current than the maximum a USB 2.0 port supplies

  • Allows for product designs that use a single connection for both data and power

Notes: Some USB devices are not compliant with the USB Battery Charging Specification and therefore may not work with this power supply.
 Does not include a USB cable.  A USB A to Micro B cable (#805-00006), is recommended for use with compatible Parallax products.


$ 145.00
$ 125.00
13%

Logic Analyzer

This is a must have tool for analyzing, evaluating and "seeing" digital serial communication signals.

Hardware - Start debugging within 5 minutes of opening your new Logic; everything is included: An ultra-flexible 22AWG 64/40 wire harness, 9 high-quality micro-hook probes, a USB cable (2 meter mini-B to A), and a nice carrying case. Logic enclosure is made from custom CNC machined aluminum and anodized for a nice durable finish. Logic’s inputs are protected against overvoltage conditions via current-limiting resistors and ultra-low-capacitance diode clamps. A resettable fuse protects the USB ground return line to augment the USB host’s existing protection. Logic comes with a 2-year warranty. If your Logic stops working for any reason, we’ll ship you a replacement at no cost, anywhere in the world.

Software - Navigate your data easily and intuitively with Logic’s fluid and fully animated mouse-driven interface. Drag the display with the mouse, zoom with the scroll wheel, display toss function, to find nearby events. You can also use the arrow keys — up, down, right and left. When data is far apart, you can use the jump to next buttons to advance to the next time the signal changes. Sessions let you save an entire setup — triggers, timing markers, data and view state — so you can pull it up later or send it to a friend. Data is compressed for manageable file sizes even with long captures. You can also save just the setup - so you can use it again later. The trigger lets you specify conditions to wait for before starting data collection. The Logic interface is fully animated and high frame-rate. And it’s not just eye candy — it’s important because it helps you maintain context when moving around large data sets. Timing markers snap to waveform edges — which is typically where you want them. Just drag the marker close to an edge to snap to it.

A number of parameters are available, including width, period, frequency and duty cycle. You can also display the error % of the measurements if you like. Export only the channels you need, for the time period you need — even report just when the data changes; it’s up to you. Decode your data automatically with the Analyzer, and see the decoded result along with the waveform. You can also export decoded protocols to CSV files.

Key Features:

  • Monitors up to 8 Channels
  • Saves up to 10 billion samples
  • Multi-Platform; Windows, Mac or Linux
  • Export – binary, VCD (ASCII) and CSV (Comma Separated Value) files
$ 3299.99
$ 3299.99
0%

Basic Soldering Kit

This complete soldering kit includes everything you need to solder your electronics projects. The kit even includes a Panavise Jr. vise holder and includes instructional "How to Solder" directions etched right on the acrylic vise base.  The kit also includes a Hakko #508 soldering iron, small pair of diagonal cutters, a tip cleaning sponge, a roll of (leaded) solder, a roll of solder wick, four rubber mounting feet, a standoff holder for the solder roll, and mounting hardware. This kit include everything you need to assemble our mini Scribbler 2 LED Badge as well as our many board kits.

Key Features:

  • Includes everything you need to start soldering up those DIY projects!
  • "How to Solder" instructions etched right on the Base Plate - perfect for beginners or a classroom environment
  • Includes a sponge to keep the soldering iron tip clean producing better solder joints
  • Diagonal cutters are "flush cutting" which provides for superior lead clipping   
  • Solder is NOT "lead free".  It contains lead, and as such, allows for much more consistant solder joints
  • Panavise Jr. holds your project solidly, an yet allows for easy "angle adjustment" when soldering complex circuits

Application Ideas:

  • Kit assembly
  • DIY
$ 1759.99
$ 1759.99
0%

Propeller Activity Board

  • 8-core Propeller P8X32A-Q44 microcontroller
  • 18 Propeller I/O fully free
  • 64 KB I2C EEPROM
  • 5 MHz crystal oscillator
  • microSD card slot
  • 1/8” mini stereo-audio jack
  • XBee socket with DO, DI, RTS, CTS access
  • Breadboard with 34 5-socket rows
  • 3-pin servo ports, jumper-select 5 V or VIN  
  • 12-bit 4-channel SPI ADC with 5 V reference-
  • 2-channel D/A, 0–3.3 V
  • 3-position power switch
  • Reset button
  • 2.1 mm center-positive power jack
  • Auto-selects between USB or external power
  • Built-in USB over-current protection
  • Power requirements: 6–9 VDC from an external power supply, or 5 V from a USB port
  • Communication: USB mini-B (onboard serial over USB)
  • Dimensions: 4.0 x 3.05 x 0.625 in (10.16 x 7.75 x 1.59 cm)
  • Operating temp range: +32 to +158 °F (0 to +70 °C
$ 1199.99
$ 1149.99
4%

Últimos productos

EEPROM,128K,serial,SMT-Ind

EEPROM,128K,serial,SMT-Ind

$ 27.97

$ 27.97
Ahorro: 0%
Board of Education Shield

Board of Education Shield

$ 745.71

$ 745.71
Ahorro: 0%
Digi 900Mhz Antenna

Digi 900Mhz Antenna

$ 526.52

$ 526.52
Ahorro: 0%
Tact Switch -LF

Tact Switch -LF

$ 9.87

$ 9.87
Ahorro: 0%
HB-25 Mounting Bracket Kit

HB-25 Mounting Bracket Kit

$ 131.37

$ 131.37
Ahorro: 0%
Turnigy Programming Card

Turnigy Programming Card

$ 295.97

$ 295.97
Ahorro: 0%
CON-SCKT,1x16,0.1

CON-SCKT,1x16,0.1",Straight,TH

$ 39.49

$ 39.49
Ahorro: 0%
DB9 connector

DB9 connector

$ 37.11

$ 37.11
Ahorro: 0%
34 Watt Solar Panel Kit

34 Watt Solar Panel Kit

$ 285.00

$ 300.00
Ahorro: 5%
Tenergy TB6B Balance Charger

Tenergy TB6B Balance Charger

$ 1776.80

$ 1776.80
Ahorro: 0%

DESCARGAS

BLOG

EVENTOS

No hay eventos programados.



Redes Sociales


Copyright © FixIngeniería
ENVÍENOS SU OPINIÓN
Enviar Cancelar
VISOR DE IMÁGENES
Cerrar
MI CARRITO DE COMPRAS
Productos
X
Imagen
Producto
Precio
Cantidad
Total

-
-
Total
-
-
0
Total a pagar
Productos
+ Envío
- Cupón
+ IVA
Total

0
0
0
0
0
Información de contacto
Cupón de descuento (si posee uno) Verificar